GORVIA all-season use high elastic PU Foam

Shanghai Gorcci Sealing Material Co., Limited has been manufacturing, exporting and supplying excellent quality GORVIA all-season use high elastic PU Foam. The product is widely used to tackle the problems arising in the field(s) of Adhesives & Sealants. GORVIA has been dedicated to the design, R&D, manufacturing, and updates of PU FOAM/SILICONE SEALANT/PU SEALANT/CAR SPRAY PAINT. We fully hope that we can satisfy customers from different fields, countries, and regions by offering them high-quality products and professional service. If you have any questions or problems, please contact us at any time through the contact information listed on our website.

Combined polyether polyol, or white material Isocyanate R-NCO, commonly known as black material MDI Assistants: blowing agent, catalyst, polymerization inhibitor, foam stabilizer, crosslinking agent, etc.

Product name	Polyurethane foam sealant
Material	Polyurethane
Color	Light yellow
Application	Used for filling joints
OEM/ODM	Accept customization
Package	12pcs/CTN
Shelf life	12 Months
Features	1.All-Season use
		2.High elastic foam
		3.High expanding yield

Technical data sheet

How to use

1. Before construction, oil stains and floating dust on the construction surface should be removed, and a small amount of water should be sprayed on the construction surface. 　　 2. Before use, shake the PU FOAM agent tank for at least 60 seconds to ensure that the material in the tank is uniform.　　 3. If the gun type PU FOAM is used, when using, turn the tank upside down and connect with the spray gun thread, turn to open the flow valve, and adjust the flow before spraying. 　　 4. If the tubular PU FOAM is used, screw the plastic | exam large | nozzle on the valve thread, align the plastic tube with the gap, and press the nozzle to spray. 　　 5. Pay attention to the travel speed when spraying, usually the spray volume is half of the required filling volume. Filling vertical gaps should be from bottom to top; when filling gaps such as ceilings, uncured foam may fall due to the action of gravity. It is recommended to provide proper support just after filling, and after the foam is cured and bonded to the wall of the gap Then withdraw the support. The foam will be debonded in about 10 minutes, and it can be cut after 60 minutes. Cut off the excess foam with a knife, and then coat the surface with cement mortar, paint or silica gel.

Application

• Filling gaps between window frames/doorframes and walls.
• Heat insulation in the water-pipe network, sewerage and central heating.
• Mounting and insulating wall panels, corrugated plates, roof tiles, etc.
• Soundproofing and sealing of partition walls, cars and boat cabs.
• Heat insulation of roof constructions.
• Filling and sealing of gaps, joints, openings and cavities.

Our Company

Our Factory & Lab

More welcome you to visit our factory!

Packing

Safety Advice :
①Keep out of children’s reach 

②Keep upright
③Shelter from direct sunlight
④Do not expose to temperatures exceeding 50℃
⑤Do not pierce or burn even after use
⑥No smoking during the whole spraying procedure

FAQ

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --