Shanghai Gorcci Sealing Material Co., Limited through years of painstaking research, relying on mature R&D technology and precise market positioning, we have created Gorvia 750ml home use Spray PU foam for filling joints. We have been constantly developing new technologies to manufacture value-added Gorvia 750ml home use Spray PU foam for filling joints.It can be widely found in the application field(s) of Adhesives & Sealants. Since established, Shanghai Gorcci Sealing Material Co., Limited have always been in strict compliance with international standards and high ethical standards, thus offering customers highly reliable products. We have always been following the business principle of 'honesty & integrity', which ensures that the most credible services are delivered to every customer.
|Other Names:||Spray Polyurethane Foam||Place of Origin:||Shanghai, China|
|Classification:||Other Adhesives||Main Raw Material:||POLYURETHANE|
|Model Number:||GF-Series Item-M||Color:||Light Yellow|
|Track free:||8-10min||Cutting Time(min):||30(+25℃|
|Adhesive strength(kPa):||120> >120||Tensile strength(kPa):||30(10%)> >30(10%)|
|Compressive strength(kPa):||120> >120||Close cells rate(%):||35~40|
Gorvia 750ml Spray PU foam for filling joints
Tag: Utmost yield 65L, High elastic foam, All-Season use, Shelf Life: 18 months
Gorvia PU Foam Description:
GF-Series Item-M 750ML PU foam, which is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the postexpansion is quite low to prevent deformation.
The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for cure.
Gorvia PU Foam Technical Features:
Close cells rate(%)
Tensile strenght (kpa)
Compressive strength (kap)
Dimension stability (23°C)
Thermal conductivity (mw/m.k)
Water absorption(up to 24h)
Cured foam temperature endurance
0°C to 40 °C
-40 °C to + 110°C
F/B3 (EN 13 501/DIN 4102-1)
Guide for using:
1. Shake can well to make the foam ready for use.
2. Clean the substrate and spray some water on it..
3. Screw foam dispenser on tightly and turn the can upside down.
4. Vertical fill the gaps from the bottom upwards.
5. Foam is tack-free (surface drying) in 8 to 10 minutes in temperatures +18°C and +25°C; Higher temperatures will result in faster setup time.
6. Remove unwanted cured foam by cutting it with knife. Well done!
For gun/professional foam, an additional foam gun dispenser is needed to spray (Needs to buy separately). In such case, you may also need to buy foam cleaner to clean the gun adapter after use.
GET IN TOUCH WITH US
We sincerely invite all interested companies to contact us for more information.