2: Screw the tank into the adapter (do not overtighten it!)
3: When the ejector starts to work, press down the trigger and let the foam flow for 10 seconds. The foam is filled into the extension tube. Drive out residual air.
4: Fix the needle on the nozzle.
5: The syringe with canister should be kept upright when the flow control device is newly used.
6: The foam output is adjusted by the trigger and controlled by the flow adjustment screw. If the adjustment screw is tightened, the syringe trigger is locked. Do not turn the trigger more than three times to loosen the adjustment screw.
7: When replacing the tank, try to shake the new tank and remove the empty tank. Install the new structure foam
tank quickly (within one minute).
tank quickly (within one minute).
8: The can change must be fast in order to prevent the foam from hardening in the adapter.
9: If necessary, replace the needle that makes the hardened foam agglomerate.
10: When cleaning the foaming gun, quickly unload the material tank. Turn the cleaning agent upside down to the foaming gun adapter and pull the trigger for thorough cleaning.
11: The foam hardening residue on the front mouth of the foaming gun is removed with this type or the like. Use a metal brush or knife to clean the outside of the long tube.
